KeypadLinc Schedule Timer Owner’s Manual

Page 19 of 26

Cross-Linking INSTEON Devices

Cross-Linking Two INSTEON Devices

Cross-Linking devices allow you to track the on/off status of the load on all Linked INSTEON Responders. For

this example we will use a primary device controlling the load and one secondary device in a virtual 3-way.

They will be referred to as: the Primary Device (the device wired to the load or load-controlling) and the

Secondary Device (the additional device in the circuit).

1) Link the Primary Device as a Controller of the Secondary Device:

a) Set the Secondary Device to the desired state (i.e., on/off, set Ramp Rate and On-

Level/brightness level)

b) Put the Primary Device into Linking Mode. (For most devices, press & hold an On or Scene button

for 10 seconds or the Set button for 3 seconds.)

c) Press & hold the Set button on the Secondary Device for 3 seconds

• If the Secondary Device is a multi-scene device (e.g., KeypadLinc), tap the Scene button

you wish to control until its LED illuminates and then press & hold the Set button for 3

seconds

2) Cross-Link the Secondary Device as a Controller of the Primary Device:

a) Set the Primary Device to the desired state (i.e., on/off, set Ramp Rate and On-Level/brightness

level)

b) Put the Secondary Device into Linking Mode. (For most devices, press & hold an On or Scene

button for 10 seconds or the Set button for 3 seconds.)

c) Press & hold the Set button on the Primary Device for 3 seconds

• If the Primary Device is a multi-scene device, tap the Scene button you wish to control

until its LED illuminates and then press & hold the Set button for 3 seconds

Upon successful completion, each device will now track the on/off status of the load (and the LEDs of the

devices it has been Cross-Linked to).

Cross-Linking More Than Two INSTEON Devices

When you have more than two devices controlling a single load, you can the Multi-Linking feature to Link one

device to multiple others in one step. To Cross-Link all the devices together, you will perform a series of Multi-

Linking circuits.

For this example, we will use a primary device controlling the load and two secondary switches in a virtual 4-

way. They will be referred to as: the Primary Device (load-controlling), the Secondary Device 1, and the

Secondary Device 2.

1) Start the circuit by setting the Primary Device to Linking Mode. (For most devices, press & hold the On or

Scene button for 10 seconds or the Set button for 3 seconds.)

2) Tap the Set button on the Primary Device to set it to Multi-Linking Mode. If the Primary Device does not

have a Set button, use the Same On or Scene you used to put the Primary Device into Linking Mode.

3) One at a time, press & hold the Set buttons on each of the Secondary Devices

4) To finish the circuit, tap the Set button on the Primary Device. If the Primary Device does not have a Set

button, use the same On or Scene button you used to put the Primary Device into Linking Mode.

5) Create the next circuit by repeating steps 1-4, substituting the Secondary Device 1 for the Primary Device

6) Create the next circuit by repeating steps 1-4, substituting the Secondary Device 2 for the Primary Device

Upon successful completion, each device in the above scenario will now track the on/off status on the load (and

the LEDs of the devices it has been Cross-Linked to).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comentários a estes Manuais

Sem comentários

Orion Car Audio HCCA COMPETITION HCCA154 Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Autolautsprecher Orion Car Audio HCCA COMPETITION HCCA154.
Wir stellen 1 PDF-Handbücher Orion Car Audio HCCA COMPETITION HCCA154 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung

Modelle	Dokumententyp
C693	Bedienungsanleitung Orion Car Audio C693 User Manual, 4 Seiten
ORION MaxxBass	Bedienungsanleitung Orion Car Audio ORION MaxxBass User Manual, 17 Seiten
C2 122	Bedienungsanleitung Orion Car Audio C2 122 User Manual, 2 Seiten
250XTR	Bedienungsanleitung Orion Car Audio 250XTR User Manual, 1 Seiten
P5.2	Bedienungsanleitung Orion Car Audio P5.2 User Manual, 8 Seiten

Insteon KeypadLinc Timer (2484DWH8) Manual Manual do Utilizador Página 19

Comentários a estes Manuais

Orion Car Audio HCCA COMPETITION HCCA154 Handbücher

Orion car audio HCCA COMPETITION HCCA154 Bedienungsanleitung (94 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Autolautsprecher Orion Car Audio

Insteon KeypadLinc Timer (2484DWH8) Manual Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Insteon KeypadLinc Timer (2484DWH8) Manual

Orion Car Audio HCCA COMPETITION HCCA154 Handbücher

Orion car audio HCCA COMPETITION HCCA154 Bedienungsanleitung (94 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Autolautsprecher Orion Car Audio